Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta Di1610 — Trang 2/2

Code: C133B

Description: Communication with option error
• Communication could not be established with the Controller Control Board within 5 seconds while printing.
Remedy: 1 Replace PWB-P.

Code: C133C

Description: Modem error
• A malfunction occurred in the Modem
Remedy: 1 Replace NCU.

Code: C133D

Description: ROM checksum error
• A malfunction occurred in the ROM.
Remedy: 1 Replace PWB-P.

Code: C13F0

Description: Laser error
• The laser output exceeds the upper limit value. • The laser output remains lower than the lower limit value.
Remedy: 1 Check cables for connection and correct as necessary. 2 Replace PH Unit. 3 Replace PWB-P.

Code: C1468

Description: EEPROM error
• An EEPROM not written with initial data was detected.
Remedy: 1 Unplug, then plug in the power cord, and turn off the copier, then turn it on again. 2 Check the connection of the EEPROM on the PWB-P, and then correct it if necessary. 3 Replace PWB-P. 4 Replace EEPROM.

Code: C14A3

Description: IR lamp malfunction
• The luminosity level of the Exposure Lamp is not stabilized within the predetermined period of time.
Remedy: 1 Check the connection of the connectors, and then correct them if necessary. 2 Replace PWB-P. 3 Replace the Scanner Assy.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie