Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta Di181 — Trang 8/8

Code: C1440

Description: Exposure Lamp out or a circuit failure
• Exposure Lamp out The average value (ODD, EVEN) of one line of gain adjustment value is smaller than a predetermined level during gain adjustment. • Circuit failure The average value of one line falls outside a predetermined range.
Remedy: 1. Check that the Original Glass is correctly installed, the Exposure Lamp turns ON properly, and the Shading Sheet is not dirty. 2. Reset the malfunction. 3. If the malfunction is still detected, check the harness between, and PJ connections on, the CCD Assy and Master Board. 4. If connections are okay, change the CCD Assy and Master Board.

Code: C1441

Description: Clamp adjustment failure
The average value of one line of clamp adjustment value is smaller than a predetermined level during clamp adjustment.
Remedy: 1. Check the CCD Assy and mirror for correct mounting positions. 2. Reset the malfunction. 3. If the malfunction is still detected, check the harness between, and PJ connections on, the CCD Assy and Master Board. 4. If connections are okay, change the CCD Assy and Master Board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie