Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta Di551 — Trang 3/22

Code: E46-23

Description: Image control abnormality
During image read, SVV is not turned OFF within the specified time and therefore preparation for next page scanning cannot be started.
Causes: PRCB (printer control board) ICB (image control board) ICB program

Code: E46-24

Description: Image control abnormality
Shading correction error (GA error)
Causes: ICB (image control board) ICB program

Code: E46-25

Description: Image control abnormality
AOC/AGC error • The light blocking cover and lens cover are removed from the scanner section. • The A/D converter board connector is disconnected. • The power cable of A/D converter board is disconnected. • The IC protector on the A/D converter board is blown out. • The exposure lamp intensity is excessive. • The exposure lamp does not light.
Causes: ADB (A/D conversion board) L1 (exposure lamp)

Code: E46-26

Description: Image control abnormality
Correction data saved on a resolution basis is not found.
Causes: ICB (image control board)

Code: E46-27

Description: Image control abnormality
The density correction γ curve cannot be generated properly.
Causes: ICB (image control board)

Code: E46-29

Description: Image control abnormality
Calibration start error.
Causes: ICB (image control board) ICB program

Code: E46-30

Description: Image control abnormality
Calibration end error
Causes: ICB (image control board) ICB program

Code: E46-31

Description: Image control abnormality
An attempt was made to perform APC initial sampling before completion of MPC.
Causes: ICB (image control board) ICB program
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie