Description: FN-112/6/ 121/10/115 abnormality
After M716 (alignment /L) starts operation, PS724 (alignment HP/L) does not turn ON within the specified time.
Description: FN-112/6/ 121/10/115 abnormality
PS22(folding knife HP) does not go ON within the specified time after M19(folding knife) starts operation of HP detection.
Description: FN-112/6/ 121/10/115 abnormality
After M720 (folding conveyance) starts operation, it does not reach the prescribed speed within the specified time.
Causes: FNSCB (FNS control board) M720 (folding conveyance)
Description: FN-112/6/ 121/10/115 abnormality
After M705 (alignment /U) starts operation, PS708 (alignment HP/U) does not turn OFF within the specified time, or does not turns ON after OFF.
Description: FN-112/6/ 121/10/115 abnormality
After M707 (paper feed roller) starts operation, it does not reach the prescribed speed within the specified time.
Causes: FNSCB (FNS control board) M707 (paper exit roller)
Description: Cover Inserter B/E abnormality
After M202 (tray up/down /L) starts operation, PS209 (tray upper limit /L) or PS210 (tray lower limit /L) do not turn ON within the specified time.
Description: Cover Inserter B/E abnormality
After M201 (tray up/down/ U) starts operation, PS204 (tray upper limit /U) or PS205 (tray lower limit /U) do not turn ON within the specified time.
Description: Cover Inserter B/E abnormality
After M203 (PI conveyance) starts operation, it does not reach the prescribed speed within the specified time.
Causes: FNSCB (FNS control board) M203 (PI conveyance)
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.