• Code: F46-42
• Description: Image control abnormality
  A route could not be opened during hard disk job automatic deletion.
• Causes: ICB (image control board) ICB program HDD (hard disk drive)

• Code: F46-43
• Description: Image control abnormality
  Hard disk access failure Hard disk failure or poor connection of connectors
• Causes: ICB (image control board) ICB program HDD (hard disk drive)

• Code: F46-50
• Description: Image control abnormality
  Communication error is detected during the tandem operation.
• Causes: ICB (image control board) ICB program Around the tandem cable

• Code: F46-51
• Description: Image control abnormality
  An error is detected during the data transfer of tandem image.
• Causes: ICB (image control board) ICB program Around the tandem cable

• Code: F46-60
• Description: Image control abnormality
  Adjustment of the sub-scan beam interval is not completed within the specified number of time for the following reason: • Defective index sensor • Abnormal 12 VDC power supply • M15 (polygon) driving failure
• Causes: Write section

• Code: F46-61
• Description: Image control abnormality
  Scanning started before completion of original auto skew correction. (Skew correction was not in time).
• Causes: PRCB (printer control board) PS311 (original mis-centering /F) PS311 (original mis-centering /R)

• Code: F46-62
• Description: Image control abnormality
  Printing started before correction of auto paper mis-centering. (Mis-centering correction was not in time).
• Causes: PS1 (paper mis-centering detection PS)

• Code: F46-63
• Description: Image control abnormality
  AGC was retried because of reduction in exposure lamp intensity, but no error occurred.
• Causes: L1 (exposure lamp)