Description: Process abnormality
Dirt correction failure of the γ sensor during γ adjustment. If this error is detected 10 successive times, the error code is displayed.
Causes: TSCB (toner control sensor board) PRCB (printer control board)
Description: Process abnormality
Dirt correction failure of the γ sensor during dot diameter adjustment. If this error is detected 10 successive times, the corresponding error code is displayed.
Causes: TSCB (toner control sensor board) PRCB (printer control board)
Description: Fan abnormality
An error for SUC_EM signal is detected when 2 seconds have passed since FM3 (conveyance suction) has turned ON. The error does not clear after 2 seconds from the OFF/ON operation.
Description: Fan abnormality
An error for FIXFAN1_EM signal is detected when 2 seconds have passed since FM8 (main unit cooling / 2) has turned ON. The error does not clear after 2 seconds from the OFF/ON operation.
Causes: FM8 (main cooling /2) PRCB (printer control board)
Description: Fan abnormality
An error for FIXFAN3_EM signal is detected when 2 seconds have passed since FM6 (paper exit fan /F) has turned ON. The error does not clear after 2 seconds from OFF/ON operation.
Causes: FM6 (paper exit fan /F) PRCB (printer control board)
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.