Description: Waste toner full sensor malfunction
• It is determined that the LED and photo receiver are faulty through a check made when a new imaging cartridge is detected.
Remedy: 1 Check the PRCB connector for proper connection and correct as necessary. 2 PS7 sensor check. 3 Change imaging cartridge. 4 Change PRCB.
Remedy: 1 Turn OFF and ON the power switch. 2 Check the PRCB connector for proper connection and correct as necessary. 3 Check the MFPB connector for proper connection and correct as necessary. 4 Check for proper connection between PRCB and MFPB and correct as necessary. 5 Change MFPB. 6 Change PRCB.
Remedy: 1 Check the exposure lamp for lighting condition when the power switch is turned ON and, if any faulty symptom is evident, correct the Scanner Unit. 2 Check the MFPB connector for proper connection and correct as necessary. 3 Change scanner unit. 4 Change MFPB.