• Code: 13DD
• Display: EEPROM BK
• Description: Backup data error
  • The printer determines that EEPROM is yet to be mounted when the main power switch is turned ON.
• Remedy: 1 Check the cable and connector for proper connection and correct as necessary. 2 Change PRCB. 3 Change MFPB.

• Code: 13E2
• Display: FLASH WRITE
• Description: Flash ROM write error
  • Flash ROM writing is found faulty during a check.
• Remedy: 1 Check the cable and connector for proper connection and correct as necessary. 2 Change PRCB. 3 Change MFPB.

• Code: 13E3
• Display: FLASH DEVICE
• Description: Flash ROM device fault
  • An erase error occurs during erasing of data in flash ROM.
• Remedy: 1 Check the cable and connector for proper connection and correct as necessary. 2 Change PRCB. 3 Change MFPB.

• Code: 13F0
• Display: ENGINE ERR
• Description: Engine control failure
  • An undefined malfunction occurs in the engine section (PRCB, etc.).
• Remedy: 1 Check the cable and connector for proper connection and correct as necessary. 2 Change PRCB. 3 Change MFPB.

• Code: 3C00
• Display: EEPROM1
• Description: Trouble related to security
• Remedy:

• Code: 3C10
• Display: EEPROM2
• Description: Trouble related to security
• Remedy:

• Code: C003
• Display: RAM ERROR
• Description: RAM error at startup (expanded memory)
  • RAM error at expanded memory is detected during printer start-up.
• Remedy: 1 Reboot the main body. 2 Check connection state of the standard/ expanded memory and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 Change the expanded memory. 5 Change PRCB.

• Code: C013
• Display: H/W ADDRESS
• Description: MAC address error at startup
  • Invalid MAC address is detected during printer start-up
• Remedy: 1 Reboot the main body. 2 Check the PRCB connector for proper connection and correct as necessary. 3 Change PRCB.