Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta Magicolor 4750EN — Trang 3/5

Code: 0F53

Display: TE SENSOR M
Description: Toner level sensor /M malfunction
• An error occurs on the toner level sensor for each color.
Remedy: 1 Check the connector between each sensor- PRCB PJ21 for proper connection and correct as necessary. 2 Replace the toner level sensor of the corresponding color. 3 Change PRCB.

Code: 0F54

Display: TE SENSOR C
Description: Toner level sensor /C malfunction
• An error occurs on the toner level sensor for each color.
Remedy: 1 Check the connector between each sensor- PRCB PJ21 for proper connection and correct as necessary. 2 Replace the toner level sensor of the corresponding color. 3 Change PRCB.

Code: 0F55

Display: TE SENSOR K
Description: Toner level sensor /K malfunction
• An error occurs on the toner level sensor for each color.
Remedy: 1 Check the connector between each sensor- PRCB PJ21 for proper connection and correct as necessary. 2 Replace the toner level sensor of the corresponding color. 3 Change PRCB.

Code: 13DD

Display: EEPROM BK
Description: Backup data error
• The engine counter data and the controller counter data are inconsistent.
Remedy: 1 Select [SERVICE MENU] ?? [BK Clear], and execute the BK Clear function. 2 Check the connector between MFPB CN16-PRCB PJ5 for proper connection and correct as necessary. 3 Change PRCB. 4 Change MFPB.

Code: 13E2

Display: FLASH WRITE
Description: Flash ROM write error
• Flash ROM writing is found faulty during a check.
Remedy: 1 Rewrite the engine firmware. 2 Change PRCB.

Code: 13E3

Display: FLASH DEVICE
Description: Flash ROM device fault
• An erase error occurs during erasing of data in flash ROM.
Remedy: 1 Rewrite the engine firmware. 2 Change PRCB.

Code: 13F0

Display: ENGINE ERR
Description: Engine control failure
• An undefined malfunction occurs in the engine section (PRCB, etc.). While the machine is operating, if it detects defective conditions, e.g. the next print is not started after the lapse of a given period of time, it stops operating and the trouble code is displayed.
Remedy: 1 Reboot the main body.

Code: 3C00

Display: EEPROM1
Description: Trouble related to security
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie