Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta Magicolor 5450 — Trang 4/5

Code: C015

Display: BOOT ROM
Description: Boot ROM error
• Boot ROM error is detected during printer startup.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 Change PWB-P.A.

Code: C022

Display: NVRAM ERROR
Description: NVRAM access error
• Correct access to NVRAM is failed during the printer starting.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 Change PWB-P.A.

Code: C025

Display: NVRAM ERROR
Description: NVRAM access error
• Lead error of destination setting file is detected during the printer starting.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change PWB-P.

Code: C026

Display: CONTROLLER ROM
Description: Controller ROM error
• Flash ROM access error is detected during the printer starting.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change PWB-P.

Code: C027

Display: CONTROLLER ROM
Description: Controller ROM error
• Final check sum error is detected during the printer starting.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change PWB-P.

Code: C050

Display: HDD ERROR
Description: HDD access error
• When correct access to the hard disc unit is failed during access.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the HDD connector for proper connection and correct as necessary. 3 Check the PWB-P connector for proper connection and correct as necessary. 4 Change HDD. 5 Change PWB-P

Code: C051

Display: HDD DISK FULL
Description: HDD full error
• Range for user space is full during access to the Hard Disk unit.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Delete the job hold in “PROOF/PRINT MENU” to increase the available range for user space. 3 Check the HDD connector for proper connection and correct as necessary. 4 Format HDD with SYS DEFAULT MENU/HDD FORMAT. 5 Change HDD.

Code: C060

Display: UPDATE ERROR
Description: Firmware update error
• Firmware update fails to complete correctly during update.
Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the cable that has been used for update of the firmware for proper connection and correct as necessary. 3 Update the firmware again. 4 Check the PWB-P connector for proper connection and correct as necessary. 5 Change PWB-P
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie