• Code: C061
• Display: HOLD JOB ERROR DUPLEX
• Description: Hold job error/No Duplex unit
  • The Duplex Option is not installed, but it is required for printing the job held in the HDD.
• Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Return to the same state as the device configuration when job was held. 3 Check the options that are mounted on the printer for proper connection and correct as necessary. 4 Check the PWB-A connector for proper connection and correct as necessary. 5 Delete the job hold in PROOF/PRINT MENU.

• Code: C062
• Display: HOLD JOB ERROR TRAY 3
• Description: Hold job error/No Tray 3
  • Tray 3 is not set when the tray 3 is required for printing of the job hold in HDD.
• Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Return to the same state as the device configuration when job was held. 3 Check the options that are mounted on the printer for proper connection and correct as necessary. 4 Check the PWB-A connector for proper connection and correct as necessary. 5 Delete the job hold in PROOF/PRINT MENU.

• Code: C063
• Display: HOLD JOB ERROR TRAY 4
• Description: Hold job error/No Tray 4
  • Tray 4 is not set when the tray 4 is required for printing of the job hold in HDD.
• Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Return to the same state as the device configuration when job was held. 3 Check the options that are mounted on the printer for proper connection and correct as necessary. 4 Check the PWB-A connector for proper connection and correct as necessary. 5 Delete the job hold in PROOF/PRINT MENU.

• Code: C064
• Display: HOLD JOB ERROR MEMORY
• Description: Hold job error/No Memory
  • Expansion memory is not set when the expansion memory is required for printing of the job hold in HDD.
• Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Return to the same state as the device configuration when job was held. 3 Check the options that are mounted on the printer for proper connection and correct as necessary. 4 Check the PWB-A connector for proper connection and correct as necessary. 5 Delete the job hold in PROOF/PRINT MENU.

• Code: FFFF
• Display: I/F COMM ERROR
• Description: Interface Communication error
  • Correct communication is failed when receiving/ sending the command between PWB-A and PWB-P.
• Remedy: 1 Turn OFF the Power Switch of the printer and turn it ON again (Restart of the printer.) 2 Check the PWB-P connector for proper connection and correct as necessary 3 Check the PWB-A connector for proper connection and correct as necessary. 4 Change PWB-A.