Remedy: Defective flash memory. Replace the main PWB and check for correct operation. Defective main PWB. Replace the main PWB and check for correct operation.
Description: Backup memory error (engine) Unable to read the main PWB IC.
Causes: Defective flash memory. Defective main PWB.
Remedy: Defective flash memory. Replace the main PWB and check for correct operation. Defective main PWB. Replace the main PWB and check for correct operation.
Description: Main motor error Pulse is not detected after 1000msec. Motor won’t stabilize after 300msec.
Causes: Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective motor. Defective main PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. main motor and Relay PWB (YC4) Relay PWB and main PWB (YC14). Defective drive transmission system of motor. Check if the gears rotate smoothly. If not, grease the bushes and gears. Check for broken gears and replace if any. Defective motor. Replace the main motor. Defective main PWB. Replace the main PWB and check for correct operation.
Description: Polygon motor synchronize error Polygon motor is not stabilized within 15 s since the motor is activated. After polygon motor is stabilized, the ready signal is not detected for 7 s continuously.
Causes: Defective connector cable or poor contact in the connector. Defective polygon motor. Defective main PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Polygon motor and main PWB (YC17) Defective polygon motor. Replace the laser scanner unit. Defective main PWB. Replace the main PWB and check for correct operation.
Description: BD stability error The BD signal is not detected for 1000 ms after processing the compulsion lighting. At the interrupt in VSYNC, the BD error is detected continuously for 10 times in 400 ms intervals.
Causes: Defective connector cable or poor contact in the connector. Defective APC PWB. Defective main PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Laser scanner unit (YC1) and main PWB (YC5) Defective APC PWB. Replace the laser scanner unit. Defective main PWB. Replace the main PWB and check for correct operation.
Description: Broken fuser heater The temperature does not reach 100° C/212 °F after the fuser heater lamp has been turned on continuously for 30 s. At the time of 20 degrees or less from specified temperature, the fuser temperature does not rise by 2 degrees or more after the fuser heater lamp has been turned on continuously for 8 s.(during ready or during print)
Causes: Defective connector cable or poor contact in the connector. Fuser thermostat triggered. Defective fuser heater. Defective main PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. fuser heater lamp and Power source PWB (YC102). Fuser thermostat triggered. Replace the fuser unit. Defective fuser heater. Replace the fuser unit. Defective main PWB. Replace the main PWB and check for correct operation.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.