Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera FS5800C — Trang 4/5

Code: E1

Description: Main motor is not phase-locked and is not rotating at normal speed.
Causes: Main motor unlockedmatchr error

Code: E2, E3

Description: Laser Scanner motor is not phase-locked and is not rotating at normal speed L-Sync signal is not detected after APC (Auto Power Control). Irregular L-Sync signal is detected.
Causes: Laser scanner motor unlocked L-Sync over L-Sync short

Code: E4

Description: Fuser thermistor is disconnected.
Causes: Thermistor open error

Code: E6

Description: Engine Program ROM checksum error
Causes: Engine Program ROM checksum error

Code: F0

Description: Controller Board system Lock error
Causes: System does not lock because of failure on communication with the printer panel.

Code: F1

Description: Controller checksum Error
Causes: Checksum failed on Controller ROM.

Code: F2

Description: RAM Read/Write Error
Causes: Checksum has failed on Controller RAM.

Code: F3

Description: System Error
Causes: General controller failure.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie