Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera FS5900C

Code: A2

Description: Fuser temperature is over 210 °C.
Fuser temperature does not reach 100 °C within 200sec,160 °C within 500sec during warming up, or it is less than 120 °C during standby, and it does not return to set temperature within 100sec after a low temperature error occurred during printing.
Causes: High temperature error Temperature rising error error

Code: A5

Description: 1. Main charger Arc discharge of contact has occurred. 2. DEV,FTR,STR bias Short circuit of contact voltage has occurred.
Causes: Charger error

Code: A6

Description: Fuser/Toner Cartridge fan is not rotating at normal speed.
Causes: Fuser/Toner Cartridge fan error

Code: A7

Description: Power supply fan is not rotating at normal speed.
Causes: Power supply fan error

Code: A8

Description: Ozone fan is not rotating at normal speed.
Causes: Ozone fan error

Code: A9

Description: Multi-Purpose Pickup Roller movement error occurred
Causes: Multi-Purpose Pickup Roller movement error

Code: AA

Description: Toner Cartridge Drive motor (sleeve motor) is not phase-locked and is not rotating at normal speed.
Causes: Toner Cartridge Drive motor (sleeve motor) unlocked

Code: AB

Description: Paper feed motor is not phase-locked and is not rotating at normal speed.
Causes: Paper feed motor unlocked error
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie