Danh mục sản phẩm

Code :

Code: E1
Description: Main motor is not phase-locked and is not rotating at normal speed.
Causes: Main motor unlockedmatchr error

Code: E2, E3
Description: Laser Scanner motor is not phase-locked and is not rotating at normal speed L-Sync signal is not detected after APC (Auto Power Control). Irregular L-Sync signal is detected.
Causes: Laser scanner motor unlocked L-Sync over L-Sync short

Code: E4
Description: Fuser thermistor is disconnected.
Causes: Thermistor open error

Code: E6
Description: Engine Program ROM checksum error
Causes: Engine Program ROM checksum error

Code: F0
Description: Controller Board system Lock error
Causes: System does not lock because of failure on communication with the printer panel.

Code: F1
Description: Controller checksum Error
Causes: Checksum failed on Controller ROM.

Code: F2
Description: RAM Read/Write Error
Causes: Checksum has failed on Controller RAM.

Code: F3
Description: System Error
Causes: General controller failure.

< 1 2 3 4 5 >

0