Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera FS7000 plus — Trang 3/4

Code: D0 ... D4

Description: Firmware program errorserroru
Causes:

Code: E0

Description: Communication failure
The engine controller does not respond to the main controller.
Causes: • Error with CPU and gate arrays of either the engine or main controller • Connection error between the engine board and the main controller board • Program overrun in the engine or main controllere

Code: E1

Description: Main motor error
The main motor won’t revolve, or will revolve too slow.
Causes: • Error with CPU and gate arrays of either the engine or main controller • The motor brake circuit is activated because of an abnormal torque of the motor. • Overheating protection circuit is activated because of the overheating main motor IC • Defective engine gate array (U2) • Defective main motor driving circuit (transistor arrays, etc.) on the engine board • Defective buffer IC for FG signal detection on the engine board

Code: E2

Description: Laser scanner motor error
The revolution of the polygon motor does not reach the predetermined revolution.ner mo
Causes: • Defective scanner motor (e.g., at its axle holder) • Connection error between polygon motor and liaison connector, or liaison connector and KP- 570 (YC3) • Defective engine gate array (U2/U6) • Defective scanner motor driver transistor

Code: E3

Description: Laser beam detection error
Beam detection is failed. The photo detector failed to detect laser beam.lutio
Causes: • Laser diode does not emit. • Connectionerror between KP-578 (YC2) and KP-579 (YC101 [within scanner]), KP-578 (YC1) and KP-570 (YC2), KP-578 (YC1) and KP-564 (YC3), KP-570 (YC1) and KP-564 (YC3), or KP-572 (YC1) and KP-564 (YC3) • Defective or contaminated pin-photo IC • Malfunctioning interlock detection circuit on the ending board • Defective engine gate array U2

Code: E4

Description: Fuser heater error
The fuser heater does not turn on. [E4 is indicated immediately after power is on.] The fuser heater does not turn on. [E4 is indicated several minutes after power is on.]
Causes: • Connection error between the engine board and the fuser unit • Defective engine gate array U2 • Defective comparators on the engine board • Defective thermistor (cut) • Connection error between the fuser board and the thermistor • Connection error between the engine board and the low-voltage power supply • Defective engine gate array U2 • Defective transistors, logic gate ICs, comparators, etc. on the engine board • Defective thermistor (showing high resistance even at heating)

Code: E5

Description: Eraser error
The eraser does not turn on.
Causes: • Connector error between CON1 board and the drum liaison board • Defective connector between the drum liaison board and the drum board • Defective transistors and logic gate ICs in the eraser controller circuit on the engine board • Connection error between drum unit board and eraser lamp • Broken eraser lamp

Code: E8

Description: Fuser unit life fuse error
The fuser unit life fuse won’t blow out.
Causes: • Defective gate array U6 • Defective fuse cut circuit on the engine board
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie