Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera FS8000CN — Trang 3/9

Code: 2111

Description: Black developer drive motor starting error
• No FG (Frequency generation) pulse is entered when ASIC (U7) on the engine controller PWB (KP-801) has issued a motor activation signal to the black developer drive motor.
Causes: Defective engine controller PWB (KP-801). Defective black developer drive motor. Excessive torque for driving black developer. (Overloaded by a damaged gear.) Defective harness (S02570) between engine controller PWB (KP-801) and main drive motor, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective black developer drive motor. Replace the black developer drive motor.
Excessive torque for driving black developer. (Overloaded by a damaged gear.) Check if the black developer rotates smoothly. Check for broken gears. Replace if any.
Defective harness (S02570) between engine controller PWB (KP-801) and main drive motor, or poor contact of the connector terminals. Check the continuity of the harness (S02570). Check the insertion of connectors.

Code: 2112

Description: Color developers drive motor starting error
• No FG (Frequency generation) pulse is entered when ASIC (U7) on the engine controller PWB (KP-801) has issued a motor activation signal to the drive motor for the color developers.
Causes: Defective engine controller PWB (KP-801). Defective color developers drive motor. Excessive torque for driving color developers. (Overloaded by a damaged gear.) Defective harness (S02609) between engine controller PWB (KP-801) and color developers drive motor, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective color developers drive motor. Replace the color developers drive motor.
Excessive torque for driving color developers. (Overloaded by a damaged gear.) Check if the yellow, magenta, and cyan developers rotate smoothly. Check for broken gears. Replace if any.
Defective harness (S02609) between engine controller PWB (KP-801) and color developers drive motor, or poor contact of the connector terminals. Check the continuity of the harness (S02609). Check the insertion of connectors.

Code: 2121

Description: Black developer drive motor starting time-out
• The FG (Frequency generation) pulse does not reach the correct frequency when ASIC (U7) on the engine controller PWB (KP-801) has issued a motor activation signal to the black developer drive motor.dev
Causes: Defective engine controller PWB (KP-801). Defective black developer drive motor. Excessive torque for driving black developer. (Overloaded by a damaged gear.) Defective harness (S02570) between engine controller PWB (KP-801) and black developer, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective black developer drive motor. Replace the black developer drive motor.
Excessive torque for driving black developer. (Overloaded by a damaged gear.) Check if the black developer rotates smoothly. Check for broken gears. Replace if any.
Defective harness (S02570) between engine controller PWB (KP-801) and black developer, or poor contact of the connector terminals. Check the continuity of the harness (S02570). Check the insertion of connectors.

Code: 2122

Description: Color developers drive motor starting time-out
• The FG (Frequency generation) pulse does not reach the correct frequency when ASIC (U8) on the engine controller PWB (KP-801) has issued a motor activation signal to the drive motor that drives the color developers.
Causes: Defective engine controller PWB (KP-801). Defective color developers drive motor. Excessive torque for driving color developers. (Overloaded by a damaged gear.) Defective harness (S02609) between engine controller PWB (KP-801) and color developers, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective color developers drive motor. Replace the color developers drive motor.
Excessive torque for driving color developers. (Overloaded by a damaged gear.) Check if the yellow, magenta, and cyan developers rotate smoothly. Check for broken gears. Replace if any.
Defective harness (S02609) between engine controller PWB (KP-801) and color developers, or poor contact of the connector terminals. Check the continuity of the harness (S02609). Check the insertion of connectors.

Code: 2320

Description: Fuser drive motor error
• The fuser control system does not operate normally.
Causes: Defective engine controller PWB (KP-801).
Remedy: Replace the engine controller PWB (KP- 801).

Code: 2340

Description: Fuser drive motor driving clock table error
• An error has occurred in the driving clock table on the engine controller PWB (KP-801) that controls the fuser drive motor (a stepping motor).
Causes: Defective engine controller PWB (KP-801).
Remedy: Replace the engine controller PWB (KP- 801).

Code: 2500

Description: Paper feed motor lock
• The FG (Frequency generation) pulse which the paper feed motor generates is not entered at the correct frequency in ASIC (U8) on the engine controller PWB (KP-801) during normal operation.n
Causes: Defective engine controller PWB (KP-801). Defective paper feed motor. Excessive torque for driving paper feed unit. (Overloaded by a damaged gear.) Defective harness (S02564) between engine controller PWB (KP-801) and paper feed motor, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective paper feed motor. Replace the paper feed motor.
Excessive torque for driving paper feed unit. (Overloaded by a damaged gear.) Check if the paper feed unit rotates smoothly. Check for broken gears. Replace if any.
Defective harness (S02564) between engine controller PWB (KP-801) and paper feed motor, or poor contact of the connector terminals. Check the continuity of the harness (S02564). Check the insertion of connectors.

Code: 2510

Description: Paper feed motor starting error
• No FG (Frequency generation) pulse is entered within the predetermined period when ASIC (U8) on the engine controller PWB (KP-801) has issued a motor activation signal to the paper feed motor.
Causes: Defective engine controller PWB (KP-801). Defective paper feed motor. Excessive torque for driving paper feed unit. (Overloaded by a damaged gear.) Defective harness (S02564) between engine controller PWB (KP-801) and paper feed motor, or poor contact of the connector terminals.
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective paper feed motor. Replace the paper feed motor.
Excessive torque for driving paper feed unit. (Overloaded by a damaged gear.) Check if the paper feed unit rotates smoothly. Check for broken gears. Replace if any.
Defective harness (S02564) between engine controller PWB (KP-801) and paper feed motor, or poor contact of the connector terminals. Check the continuity of the harness (S02564). Check the insertion of connectors.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie