Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera FS8000CN — Trang 8/9

Code: 8230

Description: Staple motor error (Document finisher)
• Staple motor of the document finisher DF-31 does not operate normally.-801).
Causes: Defective staple motor of the document finisher DF-31. Defective engine controller PWB (KP-801).
Remedy: Defective staple motor of the document finisher DF-31. Replace staple motor of the document finisher DF-31. See document finisher DF- 31’s service manual.
Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).

Code: 8290

Description: Sorter compatibility error
• The engine controller PWB (KP-801) does not recognize compatibility of the mailbox sorter SO-30 for this printer.
Causes: The ROM version of mailbox sorter S0-30 main board is not compatible for this printer. Defective mailbox sorter S0-30 main board. Defective engine controller PWB (KP-801).
Remedy: The ROM version of mailbox sorter S0-30 main board is not compatible for this printer. Replace the ROM of mailbox sorter S0-30 main board for this printer.
Defective mailbox sorter S0-30 main board. Replace the sorter SO-30 main board. See mailbox sorter SO-30’s service manual.
Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).

Code: 8510

Description: Bulk stacker compatibility error
• The engine controller PWB (KP-801) does not recognize compatibility of the bulk stacker ST-30 for installed printer.
Causes: The ROM version of bulk stacker ST-30 main board is not compatible for this printer. Defective bulk stacker ST-30 board. Defective engine controller PWB (KP-801).
Remedy: The ROM version of bulk stacker ST-30 main board is not compatible for this printer. Replace the ROM of bulk stacker ST-30 main board for this printer.
Defective bulk stacker ST-30 board. Replace the bulk stacker ST-30 main board. See bulk stacker ST-30’s service manual.
Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).

Code: F000

Description: Main controller PWB error
• The operation breakdown occurs between main controller PWB (KP- 800) and operation panel PWB (KP- 805) during 30 seconds.r. con
Causes: Defective main controller PWB (KP-800). Defective operator panel PWB (KP- 805). Defective mainengine controllers relay PWB (KP- 802). Defective engine controller PWB (KP-801). Defective harness (S02540) between engine controller PWB (KP-801) and operator panel PWB (KP- 805), or poor contact of the connector terminals.f t
Remedy: Defective main controller PWB (KP-800). Replace the main controller PWB (KP-800).
Defective operator panel PWB (KP- 805). Replace the operator panel PWB (KP-805).
Defective mainengine controllers relay PWB (KP- 802). Replace the main-engine controllers relay PWB (KP-802).
Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective harness (S02540) between engine controller PWB (KP-801) and operator panel PWB (KP- 805), or poor contact of the connector terminals. Check the continuity of the harness (S02540). Check the insertion of connectors.

Code: F010

Description: System DIMM checksum error
• Checksum for the system DIMM PWB (KP-689) that holds the system program is wrong. ST-30
Causes: Defective system DIMM PWB (KP- 689). Defective main controller PWB (KP-800).
Remedy: Defective system DIMM PWB (KP- 689). Replace the system DIMM PWB (KP-689).
Defective main controller PWB (KP-800). Replace the main controller PWB (KP-800).

Code: F020

Description: Memory check error
• Access to the expanding memory (DIMM) or RAM on the main controller PWB (KP-800) is unobtainable.o
Causes: Defective main controller PWB (KP-800). Defective expansion memory (DIMM).
Remedy: Defective main controller PWB (KP-800). Replace the main controller PWB (KP-800).
Defective expansion memory (DIMM). Replace the expansion memory (DIMM).

Code: F030

Description: Main controller PWB system error
• The error concerned with the system occurred except self diagnostic codes F0 (F010) conditions.
Causes: Defective main controller PWB (KP-800).
Remedy: Replace the main controller PWB (KP-800).

Code: F040

Description: Main - Engine controller PWBs communication error
• The communication breakdown occurred between main controller PWB (KP-800) and engine controller PWB (KP-801) during 30 seconds.
Causes: Defective engine controller PWB (KP-801). Defective main controller PWB (KP-800).
Remedy: Defective engine controller PWB (KP-801). Replace the engine controller PWB (KP- 801).
Defective main controller PWB (KP-800). Replace the main controller PWB (KP-800).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie