Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera KM2050

Code: C0030

Description: Fax control PCBsystem problem
• Processing with the fax software was disabled due to a hardware or software problem.
Causes: Defective fax control PCB.
Remedy: Replace the fax control PCB and check for correct operation.

Code: C0070

Description: Fax control PCB incompatibility detection problem
• Fax software is not compatible with MMI software.
Causes: Fax software or main software is something of the other machine.
Remedy: Check the version of the Fax software and the main software, upgrade the version to the compatible software.

Code: C0100

Description: Backup memory read/write problem (main PCB flash)
• Read and write data does not match.
Causes: Defectivemain PCB.
Remedy: Replace the main PCB and check for correct operation.

Code: C0110

Description: Backup memory data problem (main PCB flash)
• Data in the specified area of the backup memory does not match the specified values.
Causes: Problem with the backup memory data. Defective backup RAM.
Remedy: Turn safety switch off and back on and run maintenance item U020 to set the contents of the backup memory data again. If the C0110 is displayed after re-setting the backup memory contents, replace the main PCB.

Code: C0130

Description: Backup memory read/write problem (main PCB EEPROM)
• Read and write data does not match.
Causes: Defective EEPROM or main PCB.
Remedy: Replace the main PCB and check for correct operation.

Code: C0140

Description: Backup memory data problem (main PCB EEPROM)
• Data in the specified area of the backup memory does not match the specified values.
Causes: Problem with the backup memory data. Defective EEPROM.
Remedy: Turn safety switch off and back on and run maintenance item U020 to set the contents of the backup memory data again. If the C0140 is displayed after re-setting the backup memory contents, replace the EEPROM or main PCB.

Code: C0150

Description: Backup memory read/write problem (engine PCB)
• Read and write data does not match.
Causes: Defective engine PCB.
Remedy: Replace the engine PCB and check for correct operation.

Code: C0160

Description: Backup memory data problem (engine PCB)
• Data in the specified area of the backup memory does not match the specified values.
Causes: Problem with the backup memory data. Defective backup RAM.
Remedy: Turn safety switch off and back on and run maintenance item U020 to set the contents of the backup memory data again. If the C0160 is displayed after re-setting the backup memory contents, replace the engine PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie