Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera KM2050 — Trang 2/6

Code: C0170

Description: Accounting count problem
•When the power is turned on, the total count and the scan count are abnormal both on the main PCB and the engine PCB.
Causes: Defective main PCB or engine PCB.
Remedy: Replace the main PCB or engine PCB and check for correct operation.

Code: C0180

Description: Machine number mismatch
•When the power is turned on, the machine number does not match between the main PCB and the engine PCB.
Causes: Correct EEPROM is not installed. Data damage of EEPROM.
Remedy: Install the correct EEPROM. If it does not solve the problem, contact the Service Administrative Division. Contact the Service Administrative Division.

Code: C0210

Description: Communication problem between the main PCB and engine PCB
•When the power is turned on, the ma-chine does not detect the low level of SBSY and the high level of SDIR for 10 s.
Causes: Poor contact in the connector ter-minals. Defective main PCB or engine PCB.
Remedy: Check the connection of connector. Repair or replace if necessary. Replace the main PCB or engine PCB and check for correct operation.

Code: C0240

Description: Printer board PCB communication problem
• The printer board PCB does not re-spond 120 s after the power is turned on.
Causes: Poor contact in the connector ter-minals. Defective main PCB or printer board PCB.
Remedy: Check the connection of connector. Repair or replace if necessary. Replace the main PCB or printer board PCB and check for correct operation.

Code: C0250

Description: Scanner network board communication problem
• The scanner network board does not respond.
Causes: Poor contact in the connector ter-minals. Defective main PCB or scanner network board.
Remedy: Check the connection of connector. Repair or replace if necessary. Replace the main PCB or scanner network board and check for correct operation.

Code: C0280

Description: Fax control PCB communication problem
• Communication between the fax control PCB and the main PCB of the machine cannot be performed normally.
Causes: Poor contact in the connector ter-minals. Defective main PCB or fax control PCB.
Remedy: Check the connection of connector. Repair or replace if necessary. Replace the main PCB or fax control PCB and check for correct operation.

Code: C0410

Description: DP communication problem
• Communication fails five times suc-cessively.
Causes: DP installed incor-rectly. Defective engine PCB or DP driver PCB.
Remedy: Check the installation state of the DP and adjust it if it is not properly installed. Replace the engine PCB or DP driver PCB and check for correct operation.

Code: C0420

Description: First paper feeder communication problem
• Communication fails five times successively.
Causes: Paper feeder in-stalled incorrectly. Defective engine PCB or drawer main PCB.
Remedy: Check the installation state of the paper feeder and adjust it if it is not properly installed. Replace the engine PCB or drawer main PCB and check for correct operation.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie