Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera KMC850 — Trang 11/11

Code: C8210

Description: Document finisher front stapler problem • The front stapler home position sensor does not change state from nondetection to detection within 200 ms of the start of front stapler motor counterclockwise (forward) rotation. • During initialization, the front stapler home position sensor does not change state from non-detection to detection within 600 ms of the start of front stapler motor clockwise (reverse) rotation.
Causes: The front stapler connector makes poor contact. The front stapler malfunctions. a) The front stapler is blocked with a staple. b) The front stapler is broken. Defective finisher main PCB.
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. a) Remove the front stapler cartridge, and check the cartridge and the stapling section of the stapler. b) Replace the front stapler and check for correct operation. Replace the finisher main PCB and check for correct operation.

Code: C8220

Description: Document finisher rear stapler problem • The rear stapler home position sensor does not change state from non-detection to detection within 200 ms of the start of rear stapler motor counterclockwise (forward) rotation. • During initialization, the rear stapler home position sensor does not change state from non-detection to detection within 600 ms of the start of rear stapler motor clockwise (reverse) rotation.
Causes: The rear stapler connector makes poor contact. The rear stapler malfunctions. a) The rear stapler is blocked with a staple. b) The rear stapler is broken. Defective finisher main PCB.
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. a) Remove the front stapler cartridge, and check the cartridge and the stapling section of the stapler. b) Replace the front stapler and check for correct operation. Replace the finisher main PCB and check for correct operation.

Code: C9500

Description: Scanner sub PCB problem
Causes: Scanner sub PCB problem
Remedy: Check the connection of the connector of the scanner sub PCB. Replace the scanner sub PCB or the scanner main PCB one by one.

Code: C9510

Description: Scanner sub PCB problem
Causes: Scanner sub PCB problem
Remedy: Check the connection of the connector of the scanner sub PCB. Replace the scanner sub PCB or the scanner main PCB one by one.

Code: C9520

Description: Scanner sub PCB problem
Causes: Scanner sub PCB problem
Remedy: Check the connection of the connector of the scanner sub PCB. Replace the scanner sub PCB or the scanner main PCB one by one.

Code: C9530

Description: Contact the Service Administrative Division.
Causes:
Remedy: Contact the Service Administrative Division.

Code: C9540

Description: Contact the Service Administrative Division.
Causes:
Remedy: Contact the Service Administrative Division.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie