Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera TASKalfa 221 — Trang 3/6

Code: C0440

Description: Built-in finisher communication problem
Communication fails five times successively.
Causes: Poor contact in the connector terminals.
Defective PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC4 on the engine PWB and the connector of the built-in finisher, and the continuity across the connector terminals. Repair or replace if necessary.
Defective PWB. Replace the engine PWB or finisher main PWB and check for correct operation.

Code: C0500

Description: Second paper feeder communication problem
Communication fails five times succes-sively.
Causes: Second paper feeder installed incorrectly.
Defective PWB.
Remedy: Second paper feeder installed incorrectly. Check the installation state of the second paper feeder and adjust it if it is not properly installed.
Defective PWB. Replace the engine PWB or cassette main PWB and check for correct operation.

Code: C0510

Description: Third paper feeder communication problem
Communication fails five times successively.
Causes: Third paper feeder installed incorrectly.
Defective PWB.
Remedy: Third paper feeder installed incorrectly. Check the installation state of the third paper feeder and adjust it if it is not properly installed.
Defective PWB. Replace the engine PWB or cassette main PWB and check for correct operation.

Code: C0610

Description: Bitmap (DIMM) problem
There is a problem with the data or address bus of the bitmap DRAM.
Causes: Defective main PWB.
DIMM installed incorrectly.
Defective DIMM.
Remedy: Defective main PWB. Replace the main PWB and check for correct operation.
DIMM installed incorrectly. Check if the DIMM is inserted into the socket on the main PWB correctly.
Defective DIMM. Replace the DIMM and check for correct operation.

Code: C0630

Description: DMA problem
DMA transmission of compressed, decompressed, rotated, relocated or blanked-out image data does not complete within the specified period of time.
Causes: Defective main PWB.
Remedy: Replace the main PWB and check for correct operation.

Code: C0800

Description: Image processing problem
JAM05 is detected twice.
Causes: Defective main PWB.
Remedy: Replace the main PWB and check for correct operation.

Code: C0820

Description: Fax control PWB CG ROM checksum error
A checksum error occurred with the CG ROM data of the fax control PWB.
Causes: Defective fax control PWB.
Remedy: Replace the fax control PWB and verify the operation.

Code: C0830

Description: Fax control PWB flash program area checksum error
A checksum error occurred with the program of the fax control PWB.
Causes: Defective fax control PWB.
Remedy: Replace the fax control PWB and verify the operation.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie