Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera TASKalfa 221 — Trang 4/6

Code: C0860

Description: Fax control PWB software switch checksum error
A checksum error occurred with the software switch value of the fax control PWB.
Causes: Defective fax software.
Defective fax control PWB.
Remedy: Defective fax software. Install the fax software.
Defective fax control PWB. Replace the fax control PWB and verify the operation.

Code: C0870

Description: Fax control PWB to main PWB high capacity data transfer problem
High-capacity data transfer between the fax control PWB and the main PWB of the machine was not normally performed even if the data transfer was retried the specified times.
Causes: Poor contact in the connector terminals.
Defective PWB.
Remedy: Poor contact in the connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Defective PWB. Replace the fax control PWB or main PWB and check for correct operation.

Code: C0880

Description: Fax control PWB program archive problem (optional fax)
When power is turned on, the compressed program in the Flash ROM on the fax control PWB was not successfully decompressed.
Causes: Defective fax control PWB.
Remedy: Replace the fax control PWB and verify the operation.

Code: C0890

Description: Fax control PWB CG FONT archive problem (optional fax)
When power is turned on, the compressed CG font in the Flash ROM on the fax control PWB was not successfully decompressed.
Causes: Defective fax control PWB.
Remedy: Replace the fax control PWB and verify the operation.

Code: C0900

Description: Fax software incompatibility detection problem
Version of fax software is not compatible with that of main software.
Causes: Fax software version or main software is earlier.
Remedy: Check the version of the fax software and the main software, upgrade the version to the compatible software.

Code: C0920

Description: Fax file system error
The backup data is not retained for file system abnormality of flash memory of the fax control PWB.
Causes: Defective fax control PWB.
Remedy: Replace the fax control PWB and verify the operation.

Code: C2000

Description: Drive motor problem
A stable state does not continue for 1 s from 1 s after the drive motor is activated.
Causes: Poor contact in the connector terminals.
Defective drive transmission system.
Defective engine PWB.
Defective drive motor.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC6 on the engine PWB and the connector on the drive motor, and the continuity across the connector terminals. Repair or replace if necessary.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Defective drive motor. Replace the drive motor.

Code: C2200

Description: Drum motor problem
A stable state does not continue for 1 s from 1 s after the drum motor is activated.
Causes: Poor contact in the connector terminals.
Defective drive transmission system.
Defective engine PWB.
Defective drum motor.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC6 on the engine PWB and the connector on the drum motor, and the continuity across the connector terminals. Repair or replace if necessary.
Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Defective drum motor. Replace the drum motor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie