Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera TASKalfa 3511i — Trang 14/16

Code: 9120

Description: Sensor error in coin vender change (Yen 10) Change is empty despite change is enough
Causes: Coin jam in the change tube. Contact in the connector. Change empty sensor. Coin vender control PWB
Remedy: Coin jam in the change tube Check visually and remedy.
Contact in the connector Check the connection of the empty change sensor.
Change empty sensor Replace the coin mec.
Coin vender control PWB Replace the coin mec.

Code: 9130

Description: Sensor error in coin vender change (Yen 50) Change is empty despite change is enough
Causes: Coin jam in the change tube. Contact in the connector. Change empty sensor. Coin vender control PWB
Remedy: Coin jam in the change tube Check visually and remedy.
Contact in the connector Check the connection of the empty change sensor.
Change empty sensor Replace the coin mec.
Coin vender control PWB Replace the coin mec.

Code: 9140

Description: Sensor error in coin vender change (Yen 100) Change is empty despite change is enough
Causes: Coin jam in the change tube. Contact in the connector. Change empty sensor. Coin vender control PWB
Remedy: Coin jam in the change tube Check visually and remedy.
Contact in the connector Check the connection of the empty change sensor.
Change empty sensor Replace the coin mec.
Coin vender control PWB Replace the coin mec.

Code: 9150

Description: Sensor error in coin vender change (Yen 500) Change is empty despite change is enough.
Causes: Change tube. Contact in the connector. Change empty sensor. Coin vender control PWB
Remedy: Change tube Check no exchange jam is observed at the outlet and, if necessary, repair it.
Contact in the connector Check the connection of the empty change sensor.
Change empty sensor Replace the coin mec.
Coin vender control PWB Replace the coin mec.

Code: 9160

Description: Coin vender pay-out error Coin is paid out despite the pay-out motor is determined not active.
Causes: Pay-out motor
Remedy: Pay-out motor Replace the coin mec.

Code: 9170

Description: Coin vender pay-out sensor error Coin is paid out despite the pay-out motor is determined not active.
Causes: Pay-out area. Pay-out motor. Pay-out sensor
Remedy: Pay-out area Check no exchange jam is observed at the outlet and, if necessary, repair it.
Pay-out motor Replace the coin mec.
Pay-out sensor Replace the coin mec.

Code: 9180

Description: DP feed-shift motor error The HP cannot be detected even after executing the HP detection retrial 3 consecutive times. HP detection: when the DP feed-shift motor is driven to move to the HP, the HP is not detected after it is rotated once.
Causes: DP feed-shift motor. DP feed-shift sensor
Remedy: DP feed-shift motor 1. Unplug the power cord from the wall outlet, and wait five seconds. Then plug in the power cord and then turn on the power switch. 2. Confirm that the connector of the DP feed-shift motor is firmly connected, and if necessary, push the unit all the way in. 3. Confirm that the wiring connector is firmly connected, and if necessary, connect the connector all the way in. 4. If the wire is disconnected, short-circuited or has a ground fault, or the connector pin is deformed, replace the wire. 5. Replace the DF feed-shift motor.
DP feed-shift sensor 1. Rotate the DP feed-shift motor manually to check that it is not unusually difficult to rotate. 2. Check if the DP feed-shift sensor is out of position because it has dropped off and if the sensor light is interrupted by the actuator. 3. Confirm that the wiring connector is firmly connected, and if necessary, connect the connector all the way in. 4. If the wiring is disconnected, short-circuited or has a ground fault, replace the wire. 5. Replace the DP feed-shift sensor.

Code: 9500

Description: Image processing circuit fault (Platen side)
Causes: Main PWB. Engine PWB
Remedy: 1. Reinsert the connector if its connection is loose. Main PWB (YC65 and Engine PWB (YC37) 2. Replace the main PWB. 3. Replace the Engine PWB 4. Contact the Service Support.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie