Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera TASKalfa 3511i — Trang 16/16

Code: F050

Description: Print engine ROM checksum error
Causes: Engine software. Engine PWB
Remedy: Engine software Install the latest engine software.
Engine PWB 1. Turn the main power swtch off and after 5 seconds, then turn power on. 2. Confirm that the EEPROM has been properly installed. 3. If not corrected, Replace the engine PWB.

Code: F051

Description: Scanner engine ROM checksum error
Causes: Scanner software. Engine PWB
Remedy: Scanner software Install the latest scanner software.
Engine PWB 1. Turn the main power swtch off and after 5 seconds, then turn power on. 2. Confirm that the EEPROM has been properly installed. 3. If not corrected, Replace the Engine PWB.

Code: F052

Description: Panel ROM checksum error
Causes: Panel software. Main PWB
Remedy: Panel software Install the latest panel software.
Main PWB 1. Turn the main power swtch off and after 5 seconds, then turn power on. 2. Repair or replace the wire from the engine PWB, that may be grounded. (Check short-circuit between 5V and 3.3V.) 3. Check that the FCC wire connecting between the main PWB (YC64, YC65) and the engine PWB (YC3, YC37) is normal and, if necessary, re-insert.Or, replace the FCC wire. If not corrected, replace the main PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie