Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera TASKalfa 500ci — Trang 12/21

Code: C6030

Description: Fuser thermistor 1 break error During warming up, fuser thermistor 1 does not detect temperature rise of 1 C/1.8F for 10 s. When the difference of temperature of fuser thermistor 1 and 2 becomes 100C/212F or more.
Causes: Defective fuser heater 1.
Installation defectiveness on fuser thermistor 1.
Defective PWB.
Remedy: Defective fuser heater 1. Check for continuity across each heater. If none, replace the fuser unit.
Installation defectiveness on fuser thermistor 1. Measure the resistance. If it is ∞, replace the fuser unit.
Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.

Code: C6040

Description: Fuser heater error
Fuser thermistor 1 detects temperature change of 20C/36F or more for 160 ms 100 times or more since the power is turned on.
Causes: Defective fuser heater 1.
Installation defectiveness on fuser thermistor 1.
Defective PWB
Remedy: Defective fuser heater 1. Check for continuity across each heater. If none, replace the fuser unit.
Installation defectiveness on fuser thermistor 1. Measure the resistance. If it is ∞, replace the fuser unit.
Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.

Code: C6050

Description: Abnormally low fuser thermistor 1 temperature
During printing, the temperature at the heat roller lower than 100C/212F is detected continuously for 1 s.
Causes: Defective fuser heater 1.
Defective PWB
Remedy: Defective fuser heater 1. Replace the fuser unit.
Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.

Code: C6100

Description: Fuser heater 2 break
Fuser thermistor 2 detected less than 100C/212F for 120 s during driving. Fuser thermistor 2 deduced less than 150C/302F for 300 s during driving. Fuser thermistor 2 deduced less than 100C/212F for 5 s during driving.
Causes: Defective fuser heater 2.
Defective fuser thermostat 2.
Installation defectiveness on fuser thermistor 2.
Defective PWB.
Remedy: Defective fuser heater 2. Check for continuity across each heater. If none, replace the fuser unit.
Defective fuser thermostat 2. Check for continuity across thermostat. If none, remove the cause and replace the fuser unit.
Installation defectiveness on fuser thermistor 2. Measure the resistance. If it is ∞, replace the fuser unit.
Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.

Code: C6120

Description: Abnormally high fuser thermistor 2 temperature
The fuser temperature exceeds 190C/ 374F for 1 s.
Causes: Installation defectiveness on fuser thermistor 2.
Defective PWB
Remedy: Installation defectiveness on fuser thermistor 2. Measure the resistance. If it is ∞, replace the fuser unit.
Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.

Code: C6130

Description: Fuser thermistor 2 break error Fuser thermistor 2 detects a temperature of 30 C/86F or lower for 45 s.
Causes: Installation defectiveness on fuser thermistor 2.
Defective fuser heater 2.
Defective PWB.
Remedy: Installation defectiveness on fuser thermistor 2. Measure the resistance. If it is ∞, replace the fuser unit.
Defective fuser heater 2. Check for continuity across each heater. If none, replace the fuser unit.
Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.

Code: C6200

Description: Fuser heater 1 edge break
During warming up, fuser thermistor 1 does not detect temperature rise of 1C/ 1.8F for 10 s. Fuser thermistor 1 does not reach 90F even after 30 s during warming up.
Causes: Defective fuser heater 1.
Defective fuser thermostat 1.
Installation defectiveness on fuser thermistor 1.
Defective PWB.
Remedy: Defective fuser heater 1. Check for continuity across each heater. If none, replace the fuser unit.
Defective fuser thermostat 1. Check for continuity across thermostat. If none, remove the cause and replace the fuser unit.
Installation defectiveness on fuser thermistor 1. Measure the resistance. If it is ∞, replace the fuser unit.
Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.

Code: C6220

Description: Abnormally high fuser thermistor 1 edge temperature
The fuser temperature exceeds 250C/ 482F for 1 s.
Causes: Installation defectiveness on fuser thermistor 1.
Defective PWB.
Remedy: Installation defectiveness on fuser thermistor 1. Measure the resistance. If it is ∞, replace the fuser unit.
Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie