Code :

Code: 53
Description: Unformatted Flash
Remedy: This message is displayed when the printer detects an unformatted flash at POST. Press Go to clear the message. The flash is marked bad and normal operation continues. Flash operations are not allowed until the flash is formatted.

Code: 54
Description: Std Par ENA Connection Lost
Remedy: This message is displayed when the printer detects during POST that the connection to an ENA has been lost. Once a connection is initially established, a printer setting is modified to 54 Par x ENA to note a connection exists. Each time the power is cycled on, the connection is lost.

Code: 54
Description: Std Network Software Error
Remedy: This message is displayed when the RIP software detects that a network port is installed but cannot establish communications with it.

Code: 54
Description: Network x Software Error
Remedy: Press Go to clear this message. The printer disables all communications to the associated network interface. No data may be received or sent from or to the associated interface. The user can program new firmware in the network using the parallel port after this message clears.

Code: 54
Description: Serial Option x Error
Remedy: This message is displayed when a serial error, either framing, parity or overrun, is detected on the specified (option x) serial port. This usually means the serial port is not set up correctly. Press Go to clear the message and continue processing the print job. Note: If the print job does not print correctly, make sure that the correct cable is being used.

Code: 55
Description: Unsupported Option in Slot x 55 Unsupported Flash in Slot x
Remedy: This message displays when an unsupported option is installed or when an unsupported flash DIMM, such as a C750 version, is installed in a memory slot. Turn off the printer and remove the offending option.

Code: 56
Description: Serial Port x Disabled
Remedy: These messages may appear when data is sent to the printer across a serial port, but the port is disabled. Note: Once the error is displayed the first time, reporting of further errors is suppressed until the printer is reset or menus are entered. The following actions can be taken: • Press Go to clear the message. Any data received on the serial port is discarded. • Press Menu to access the Busy/Waiting Menu. The following functions may be available: • Reset Printer • Reset Active Bin • Check Supply Levels Note: Menu Lockout does NOT prevent access to the Busy/ Waiting Menu.

Code: 56
Description: Std Parallel Port Disabled 56 Parallel Port x Disabled
Remedy: These messages may appear when data is sent to the printer across a parallel port, but the port is disabled. Note: Once the error is displayed the first time, reporting of further errors is suppressed until the printer is reset or menus are entered. The following actions can be taken: • Press Go to clear the message. Any data received on the parallel port is discarded. • Press Menu to access the Busy/Waiting Menu. The following functions may be available: • Reset Printer • Reset Active Bin • Check Supply Levels Note: Menu Lockout does NOT prevent access to the Busy/ Waiting Menu.