Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark C792dte — Trang 10/19

Code: 34

Description: Short Paper
Remedy: • Select Continue to clear the message and continue printing. Note: The printer does not automatically reprint the page that prompted the message. • Check the tray length and width guides to ensure the media is properly fitted. • Make sure the print job is requesting the correct size of media. • Adjust the Paper Size setting for the media size being used. • If the MP Feeder Size is set to Universal, make sure the media is large enough for the formatted data. • Cancel the current job. Replace the paper pick mechanism. See “Paper pick mechanism assembly removal”. • If the problem still exists, replace the system board. See “System board removal”.

Code: 35

Description: Insufficient memory to support Resource Save feature
Remedy: • Select Continue to disable Resource Save and continue printing. • To enable Resource Save after receiving this message: - Make sure the link buffers are set to Auto, then exit the menus to activate the link buffer changes. - When Ready is displayed, enable Resource Save. • Install additional memory. • If this does not fix the problem, replace the system board. See “System board removal”.

Code: 37

Description: Insufficient memory to collate job
Remedy: • Select Continue to print the portion of the job already stored and begin collating the rest of the job. • Cancel the current job. • If this does not fix the problem, replace the system board. See “System board removal”.

Code: 38

Description: Memory Full
Remedy: The following options are available: • Select Continue to clear the message and continue printing. The job may not print correctly. • Cancel the current job. • Install additional printer memory. • If this does not fix the problem, replace the system board. See “System board removal”.

Code: 39

Description: Complex Page
Remedy: The page is too complex to print. Options are: • Select Continue to continue. The job may not print correctly. • Cancel the job.

Code: 50

Description: PPDS Font Error
Remedy: • Select Continue to clear the message and continue printing. The job may not print correctly. • Cancel the current job. • If this does not fix the problem, replace the system board. See “System board removal”.

Code: 51

Description: Defective Flash
Remedy: • Select Continue to clear the message and continue printing. • Install different flash memory before downloading any resources to flash. • If this does not fix the problem, replace the system board. See “System board removal”

Code: 52

Description: Flash Full
Remedy: • Select Continue to clear the message and continue printing. Note: Downloaded fonts and macros not previously stored in flash memory are deleted. • Delete fonts, macros, and other data stored in flash memory. • Install a larger capacity flash memory card. • If this does not fix the problem, replace the system board. See “System board removal”.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie