Code :

Code: 34
Description: Short Paper
Remedy: • Select Continue to clear the message and continue printing. Note: The printer does not automatically reprint the page that prompted the message. • Check the tray length and width guides to ensure the media is properly fitted. • Make sure the print job is requesting the correct size of media. • Adjust the Paper Size setting for the media size being used. • If the MP Feeder Size is set to Universal, make sure the media is large enough for the formatted data. • Cancel the current job. Replace the paper pick mechanism. See “Paper pick mechanism assembly removal”. • If the problem still exists, replace the system board. See “System board removal”.

Code: 35
Description: Insufficient memory to support Resource Save feature
Remedy: • Select Continue to disable Resource Save and continue printing. • To enable Resource Save after receiving this message: - Make sure the link buffers are set to Auto, then exit the menus to activate the link buffer changes. - When Ready is displayed, enable Resource Save. • Install additional memory. • If this does not fix the problem, replace the system board. See “System board removal”.

Code: 37
Description: Insufficient memory to collate job
Remedy: • Select Continue to print the portion of the job already stored and begin collating the rest of the job. • Cancel the current job. • If this does not fix the problem, replace the system board. See “System board removal”.

Code: 38
Description: Memory Full
Remedy: The following options are available: • Select Continue to clear the message and continue printing. The job may not print correctly. • Cancel the current job. • Install additional printer memory. • If this does not fix the problem, replace the system board. See “System board removal”.

Code: 39
Description: Complex Page
Remedy: The page is too complex to print. Options are: • Select Continue to continue. The job may not print correctly. • Cancel the job.

Code: 50
Description: PPDS Font Error
Remedy: • Select Continue to clear the message and continue printing. The job may not print correctly. • Cancel the current job. • If this does not fix the problem, replace the system board. See “System board removal”.

Code: 51
Description: Defective Flash
Remedy: • Select Continue to clear the message and continue printing. • Install different flash memory before downloading any resources to flash. • If this does not fix the problem, replace the system board. See “System board removal”

Code: 52
Description: Flash Full
Remedy: • Select Continue to clear the message and continue printing. Note: Downloaded fonts and macros not previously stored in flash memory are deleted. • Delete fonts, macros, and other data stored in flash memory. • Install a larger capacity flash memory card. • If this does not fix the problem, replace the system board. See “System board removal”.