Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark C912 — Trang 4/8

Code: 948

Description: Machine ID Error
Remedy: 1 Turn the printer off and wait 30 seconds. Turn the printer on. Did this fix the problem? Problem solved. Verify proper installation of the EPROMs on both the printer controller board and the printhead controller board. Go to step 2.
2 Are the EPROMs installed correctly? Replace the printer controller board. Go to step 3. Install the EPROMs correctly.
3 Did replacing the printer controller board fix the problem? Problem solved. Replace the printhead controller board.

Code: 949

Description: Tray (x) Comm
Remedy: 1 Replace the printer controller board. Does this fix the problem? Problem solved. Replace the expansion feeder control board for trays 2-5. If the problem is with the highcapacity paper feeder, replace the HCPF board.

Code: 950

Description: Pr Control Board
Remedy: Replace the printer controller board.

Code: 952

Description: NVRAM Chip Failure
Remedy: 1 Make sure the 80-pin RIP printer controller cable is not broken or damaged. Is the cable broken or damaged? Replace the cable. Go to step 2.
2 Is EPROM U5 present on the printer controller board? Replace the printer controller board. Install EPROM U5

Code: 954

Description: NVRAM CRC Failure
Remedy: Replace the RIP board.

Code: 955

Description: Code CRC
Remedy: Replace the RIP board.

Code: 956

Description: Processor Failure
Remedy: Replace the RIP board.

Code: 957

Description: ASIC Failure
Remedy: Replace the RIP board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie