Danh mục sản phẩm

Code :

Code: 999
Description: Stapler Motor Error
Remedy: 1 Are staples jammed in the stapler? Go to step 2. Go to step 3.
2 Clear the staple jam and run the staple test in diagnostic mode or run a staple job. Does the problem reoccur? Replace the staple cartridge and to go step 4. Problem solved.
3 Are the connectors CN5 on the stapler and PJ1 on the finisher control board securely connected? Go to step 5. Securely connect the connectors.
4 Did replacement of the stapler cartridge resolve the problem? Problem resolved. Replace the stapler.
5 Make sure the finisher set switch is activated. Measure for 5 V dc between pins 11 and 12 on stapler connector CN5. Is 5 V dc present? Replace the stapler. Replace the finisher control board.
6 Did replacement of the finisher control board correct the problem? Problem solved. Go to step 7.
7 Is there continuity on the stapler to finisher control board cable? Replace the power supply. Replace the cable.

‹ First < 5 6 7 8