Code :

Code: 950
Description: Mirror Mismatch
Remedy: 1 Is 950.xx(xx= 30 or greater) displayed? Go to step 2. Go to step 3 2 Replace the operator panel that was just installed with the original operator panel. Restart the printer. Did this fix the problem? Problem solved. Install a new operator panel. Do not use the operator panel that generated the 950 error. Contact your technical support center. 3 Replace the RIP card that was just installed with the original RIP card. Restart the printer. Did this fix the problem? Problem solved. Install a new RIP card. Do not use the RIP card that generated the 950 error. Contact your technical support center.

Code: 952
Description: NVRAM Chip Failure
Remedy: 1 Make sure the 26-pin RIP printer controller cable is not broken or damaged. Is the cable broken or damaged? Replace the cable. Go to step 2. 2 Is EPROM U7 present on the printer controller board? Replace the printer controller board. Install EPROM U7.

Code: 956
Description: Processor Failure 956.00 Service System Board - RIP card failure: processor failure 956.01 Service System Board - Processor overtemp
Remedy: Replace the RIP board.

‹ First < 7 8 9 10 11 12 13 >