• Code: 200.yy
• Description: Paper jam
• Remedy: 1. Clear the paper path. 2. After clearing the paper path, select Continue to resume printing.

• Code: 249.yy
• Description: Paper jam
• Remedy: 1. Clear the paper path. 2. After clearing the paper path, select Continue to resume printing.

• Code: 24x.yy
• Description: Paper jam
• Remedy: 1. Clear the paper path. 2. After clearing the paper path, select Continue to resume printing.

• Code: 250.yy
• Description: Paper jam
• Remedy: 1. Clear the paper path. 2. After clearing the paper path, select Continue to resume printing.

• Code: 30
• Description: Coating roll missing The coating roll in the fuser is improperly installed or missing.
• Remedy: Install the coating roll, and close the top cover.

• Code: 30
• Description: <color> print unit missing. The specified color print unit is improperly installed or missing.
• Remedy: Install the specified print unit, and close the top cover.

• Code: 34
• Description: Incorrect media
• Remedy: -Load the appropriate media in the selected source. -Select Continue to clear the message and print the job using a different paper source.

• Code: 34
• Description: Short Paper The paper used in a print job is too short in length for the current print job.
• Remedy: -Select Continue to clear the message and continue printing. The printer does not automatically reprint the page that prompted the message. -Check tray length and width guides to ensure paper is properly fitted in the tray. -Make sure the print job is requesting the correct size of paper. -Adjust the Paper Size setting for the size paper you are using. If MP Feeder Size is set to Universal, make sure the paper is large enough for the formatted data. -Cancel the current job.