Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark C920n — Trang 10/13

Code: 950

Description: Mirror Mismatch
Remedy: 1 Is 950.xx(xx= 30 or greater) displayed? Go to step 2. Go to step 3 2 Replace the operator panel that was just installed with the original operator panel. Restart the printer. Did this fix the problem? Problem solved. Install a new operator panel. Do not use the operator panel that generated the 950 error. Contact your technical support center. 3 Replace the RIP card that was just installed with the original RIP card. Restart the printer. Did this fix the problem? Problem solved. Install a new RIP card. Do not use the RIP card that generated the 950 error. Contact your technical support center.

Code: 952

Description: NVRAM Chip Failure
Remedy: 1 Make sure the 26-pin RIP printer controller cable is not broken or damaged. Is the cable broken or damaged? Replace the cable. Go to step 2. 2 Is EPROM U7 present on the printer controller board? Replace the printer controller board. Install EPROM U7.

Code: 954

Description: NVRAM CRC Failure
Remedy: Replace the RIP board.

Code: 955

Description: Code CRC
Remedy: Replace the RIP board.

Code: 956

Description: Processor Failure 956.00 Service System Board - RIP card failure: processor failure 956.01 Service System Board - Processor overtemp
Remedy: Replace the RIP board.

Code: 957

Description: ASIC Failure
Remedy: Replace the RIP board.

Code: 958

Description: NAND Failure
Remedy: Replace the RIP board.

Code: 960

Description: RAM Slot 1 Bad 960 Service RAM Memory Error
Remedy: Replace the RAM card or the RIP board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie