Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark C950 — Trang 18/24

Code: 56

Description: Serial port [x] disabled
Remedy: Try one or more of the following: •Touch Continue to clear the message. The printer discards any data received through the serial port. •Make sure the Serial Buffer menu is not set to Disabled.

Code: 56

Description: Standard USB port disabled
Remedy: Try one or more of the following: •Touch Continue to clear the message. The printer discards any data received through the USB port. •Make sure the USB Buffer menu item is not set to Disabled.

Code: 56

Description: Standard parallel port disabled
Remedy: Try one or more of the following: •Touch Continue to clear the message. The printer discards any data received through the parallel port. •Make sure the Parallel Buffer menu item is not set to Disabled.

Code: 56

Description: USB port [x] disabled
Remedy: Try one or more of the following: •Touch Continue to clear the message. The printer discards any data received through the USB port. •Make sure the USB Buffer menu is not set to Disabled.

Code: 57

Description: Configuration change, some held jobs were not restored
Remedy: Something has changed in the printer to invalidate the held jobs. Possible changes include: •The printer firmware has been updated. •Paper input options needed for the print job were removed. •The print job was created using data from a device in the USB port and the device is no longer in the USB port. •The printer hard disk contains print jobs that were stored while installed in a different printer model. Touch Continue to clear the message.

Code: 58

Description: Too many disks installed
Remedy: 1.Turn the printer off. 2.Unplug the power cord from the wall outlet. 3.Remove the excess disks. 4.Connect the power cord to a properly grounded electrical outlet. 5.Turn the printer back on.

Code: 58

Description: Too many flash options installed
Remedy: 1.Turn the printer off. 2.Unplug the power cord from the wall outlet. 3.Remove the excess flash memory. 4.Connect the power cord to a properly grounded outlet. 5.Turn the printer back on.

Code: 58

Description: Too many trays attached
Remedy: 1.Turn the printer off. 2.Unplug the power cord from the wall outlet. 3.Remove the additional trays. 4.Connect the power cord to a properly grounded outlet. 5.Turn the printer back on.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie