Remedy: 1.Replace the photoconductor, following the instruction sheet that came with the replacement part. 2.From the printer control panel, touch Continue to clear the message and continue printing.
Description: Service hard drive error Hard drive/configuration ID mismatch
Remedy: 1 Check the hard drive data and power connections. Are the above connections connected properly? Replace the hard drive. Replace the connections. 2 Perform a POR. Does the error remain when the power is turned off/on again? Replace the RIP PCBA. Go to “RIP PCBA removal” . Problem solved.
Remedy: The specified print or toner cartridge is empty. 1.Replace the specified cartridge. For instructions on replacing a cartridge, from the printer control panel, touch More Information. 2.Touch Continue to clear the message and continue printing.
Remedy: 1.Order a replacement toner cartridge immediately. 2.Remove the specified cartridge. 3.Firmly shake the cartridge side-to-side and front-to-back several times to redistribute the toner. 4.Reinsert the cartridge, and then touch Continue to clear the message and continue printing. Note: Repeat this procedure multiple times until the print remains faded, and then replace the cartridge.
Remedy: The specified cartridge is very low. 1.For instructions on replacing a cartridge, from the printer control panel, touch More Information. 2.Touch Continue to clear the message and continue printing.
Description: Service data error Data communication error
Remedy: 1 Upgrade the firmware. Does the problem persist? Go to step 2. Problem resolved 2 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal” . Problem resolved
Description: Service RIP engine Comm. RIP card assembly communication failure
Remedy: 1 Perform a POR. Does the error occur when the power is turned off/on? Go to step 2. Perform several print tests. If the problem remains, then go to step 2. 2 Turn the printer off for 60 seconds. Does the error occur when the power is turned off/on again? Go to step 3. Problem solved. 3 Check the RIP PCBA for connection. Is the above sensor connected properly? Replace the RIP PCBA. Go to “RIP PCBA removal” . Go to step 4. Replace the connection. 4 Perform a print test. Go to “PRINT TESTS” . Does the error still occur? Replace the lower engine PCBA. Go to “Lower engine PCBA removal” . Go to step 5. Problem solved. 5 Perform a print test. Go to “PRINT TESTS” . Does the error still occur? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal” . Problem solved.
Description: Service data error Clock signal communication error
Remedy: 1 Check the upper printer engine PCBA connections. Are the above connections properly connected and not damaged? Go to step 2. Connect the components properly and replace damaged connections. 2 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal” . If the error remains, then go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal” . Problem resolved
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.