Danh mục sản phẩm

Code :

Code: 957
Description: ASIC failure
Remedy: Error codes 956, 957, and 959 are controller card failures. Perform a power on reset (POR). If this does not fix the problem, replace the controller card.

Code: 958
Description: NAND failure
Remedy: Before proceeding, perform a power on reset (POR) to see if the ECC error correction code can reflash NAND. If this does not fix the problem, replace the controller card.

Code: 959
Description: SRAM failure
Remedy: Error codes 956, 957, and 959 are controller card failures. Perform a power on reset (POR). If this does not fix the problem, replace the controller card.

Code: 960
Description: RAM soldered on the card is bad
Remedy: Indicates a DRAM Memory Error on the controller card. Replace the controller card.

Code: 961
Description: RAM in slot 1 is bad
Remedy: If another SDRAM memory DIMM is available, turn the power off and switch the DIMM. If the memory card now works correctly, replace the failing DIMM. If this does not fix the problem, replace the controller card. If another DIMM is not available, replace the memory option first and then the controller card if necessary.

Code: 964
Description: Download emulation CRC failure. Checksum failure detected in the emulation header or emulation file.
Remedy: Perform the following: 1. Disable the downloaded emulations. See “Download Emuls”. 2. Reprogram the downloaded emulations. If the problem persists, replace the emulation card.

Code: 975
Description: Unrecognizable network port
Remedy: A failure with the network port. If the printer is a network model, replace the controller card.

Code: 976
Description: Software error in network port
Remedy: A failure with the network port. If the printer is a network model, replace the controller card.

‹ First < 4 5 6 7 8 >

0