Remedy: This message displays when the page is too complex to print. The following actions may be taken: • Press Go to clear the message and continue the job. Some data loss may occur. Simplify the print job and reprint, if necessary. • Press Menu until Busy/Waiting appears. The following selections are possible: –Cancel Job –Reset Printer
Remedy: A firmware card containing network code is installed on a non-network printer or a nonnetwork card is installed on a network printer. Press and hold Go while powering the printer. The unsupported card will be ignored. Remove the card.
Remedy: A firmware card containing unsupported code is detected. Press and hold Go while powering the printer. The unsupported card will be ignored. Remove the card.
Remedy: This message displays when the PPDS interpreter has encountered a font error. Note: This error may only occur when the printer is formatting PPDS print data. The following actions may be taken: • Press Go to clear the message and continue processing the job. • Press Menu until Busy/Waiting appears. The following are available: –Cancel Job –Reset Printer
Remedy: This message displays when the printer detects a defective flash. This error may occur at power on, or during flash format and write operations. Press Go to clear the message. The flash is marked as bad and normal operation continues. Flash operations are not allowed until the problem is resolved.
Remedy: This message displays when there is not enough free space in the flash memory to hold the resources that have been requested to be written to flash. The following actions may be taken: • Press Go to clear the message and continue processing the job. • Press Menu until Busy/Waiting appears. The following are available: –Cancel Job –Reset Printer
Remedy: This message displays when the printer detects an unformatted flash at power on. Press Go to clear the message. The flash is marked as bad and normal operation continues. Flash operations are not allowed until the flash is formatted.
Remedy: This error displays when a network port is detected, but the printer cannot establish communications with it. Press Go to clear the message. The printer disables all communications to the network interface.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.