• Code: 56
• Description: Standard USB Port Disabled Displayed when status is requested over the USB port, but the port has been disabled. Once the error has been displayed for the first time, reporting of further errors is suppressed until the menus are entered or the printer is reset.
• Remedy: The following actions may be taken: • Press to clear the message. The printer discards any data received on the USB port. • Press until Busy/ Waiting appears. The following are available: - Reset Printer Reset Active Bin

• Code: 56
• Description: USB Port [x] Disabled Displayed when status is requested over the USB port, but the port has been disabled. Once the error has been displayed for the first time, reporting of further errors is suppressed until the menus are entered or the printer is reset.
• Remedy: The following actions may be taken: • Press to clear the message. The printer discards any data received on the USB port. • Press until Busy/ Waiting appears. The following are available: - Reset Printer Reset Active Bin

• Code: 58
• Description: Invalid Tray Configuration Either no input trays or there are optional trays above the RFID option.
• Remedy: 1. Ensure the RFID option is in first position under printer and that there is at least one input tray beneath the RFID option. 2. Check the RFID firmware card, RFID interface card, RFID cable, and RFID option for correct installation. Go to “High capacity input tray (HCIT) pick arm bracket assembly removal”. 3. Replace the RFID UHF option.

• Code: 58
• Description: Too Many Bins Attached This error code displays when too many bins are attached to the printer.
• Remedy: 1. Turn off and unplug the printer. 2. Remove the excess bins. 3. Plug in the printer, and turn it on.

• Code: 58
• Description: Too Many Disks Installed This error code displays when too many disks are attached to the printer.
• Remedy: 1. Turn off and unplug the printer. 2. Remove the excess disks. 3. Plug in the printer, and turn it on.

• Code: 58
• Description: Too Many Flash Options This error code displays when too many user flash memory options or too many optional firmware cards have been installed. User can power off and remove extra flash options.
• Remedy: 1. Turn off and unplug the printer. 2. Remove the excess flash memory. 3. Plug in the printer, and turn it on.

• Code: 58
• Description: Too Many Trays Attached This error code displays when too many input trays are attached to the printer. Note: With the RFID option attached, the maximum number of trays is three. Without the RFID option attached, the maximum number is four.
• Remedy: 1. Turn off and unplug the printer. 2. Remove the excess trays. 3. Plug in the printer, and turn it on.

• Code: 59
• Description: Incompatible Duplex An incompatible duplex option is installed. Remove the incompatible duplex option and press to clear the message. Note: If the user installed the incompatible device to satisfy a Check Device Connections/ reattach message, the user should reinstall an associated compatible option or hot unplug the option.
• Remedy: 1. Turn off and unplug the printer. 2. Remove the incompatible external duplex unit assembly. 3. Plug in the printer, and turn it on.