• Code: 32.xx
• Description: Unsupported Print Cartridge
• Remedy: An unsupported toner cartridge is installed. A supported cartridge must be installed.

• Code: 33.xx
• Description: Chg Cart Invalid Refill
• Remedy: Remove the toner cartridge, and install a new cartridge.

• Code: 34
• Description: Short Paper
• Remedy: The MFP determines the paper length is too short to print the formatted data. This occurs when the MFP does not know the actual paper size loaded in the tray. Make sure the Paper Size setting is correct for the size paper that is being used. The following actions may be taken: Press or Start to clear the message and continue printing. Press Stop to cancel the job.

• Code: 37
• Description: Insufficient Collation Area
• Remedy: This message displays when the MFP memory is insufficient to collate the pages of the print job. Press or Start to clear the message. Press Stop to cancel the job.

• Code: 38
• Description: Memory Full
• Remedy: This message displays when the MFP is processing an incoming job and there is insufficient memory available to continue processing the job. The following actions may be taken: • Press or Start to clear the message and continue printing. • Press Stop to cancel the print job. Clearing the error this way may cause data loss.

• Code: 54
• Description: Std Network Software Error
• Remedy: This error displays when a network port is detected, but the MFP cannot establish communications with it. Press Go to clear the message. The MFP disables all communications to the network interface.

• Code: 56
• Description: Standard USB Port Disabled
• Remedy: Displayed when status is requested over the USB port, but the port has been disabled. Once the error has been displayed for the first time, reporting of further errors is suppressed until the menus are entered or the MFP is reset. The following actions may be taken: • Press Go to clear the message. The MFP discards any data received on the USB port. • Press Menu until Busy/Waiting appears, and select Reset Printer.

• Code: 84
• Description: Photoconductor Life Warning
• Remedy: This message displays when the photoconductor unit is near end of life. Press or Start to clear the message and continue printing. Press Stop to cancel the job being processed.