Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark X342n — Trang 6/6

Code: 944

Description: Scanner — Lamp error
Remedy: Restart the MFP. Verify that the lamp is not illuminating during the startup.
CCD Controller card If you are receiving a 942 error, check the home position sensor for dirt, and ensure that the sensor is properly connected to the CCD. Ensure that connectors J1 and J4 are properly connected. Inspect both ribbon cable connections on CCD for proper connection. If connector J1 is properly connected, verify the following voltages on the controller card. Check pin 1 for +5V, pin 5 for +24V, and pin 18 for +24V. Pins 2, 4, 6, 13, 16, and 17 are ground. If connector J4 is properly connected, verify the following voltages on the controller card. Check pin 19 for +12V and pin 20 for +5V. If voltages are present, replace the CCD. If there are voltage irregularities, replace the controller card.

Code: 948

Description: Fax Storage
Remedy: There is an unrecoverable problem with the flash file system used for fax storage.

Code: 953

Description: NVRAM Failure
Remedy: Replace the controller card.

Code: 960

Description: RAM soldered on the card is bad
Remedy: Indicates a DRAM Memory Error on the controller card. Replace the controller card.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie