Danh mục sản phẩm

Code :

Code: 921
Description: Fuser error Fuser below standby temperature in idle.
Remedy: Perform cold fuser service check to isolate the problem to: - Fuser lamp - Lamp cable - Complete fuser (thermistor) LVPS

Code: 922
Description: Fuser error Fuser failed to reach standby temperature.
Remedy: Perform cold fuser service check to isolate the problem to: - Fuser lamp - Lamp cable - Complete fuser (thermistor) LVPS

Code: 923
Description: Fuser error Fuser too hot during printing or in idle.
Remedy: Perform hot fuser service check to isolate the problem to: - Fuser lamp - Complete fuser (thermistor)

Code: 924
Description: Fuser error Open circuit in thermistor path.
Remedy: Perform hot fuser service check to isolate the problem to: - Fuser lamp - Complete fuser (thermistor)

Code: 925
Description: Fuser error Incorrect fuser lamp installed.
Remedy: Perform hot fuser service check to isolate the problem to: - Fuser lamp - Complete fuser (thermistor)

Code: 929
Description: Toner sensor Indicates a problem with either the toner sensor or print cartridge.
Remedy: Test the toner sensor using the "Base Sensor Test" in the diagnostic menu. • If the test fails, replace the sensor. • If the test passes, replace the cartridge.

Code: 931
Description: Printhead error No first Hsync.
Remedy: Inspect the printhead cable for continuity / connection. If the inspection passes, replace the printhead.

Code: 932
Description: Printhead error Lost Hsync.
Remedy: Inspect the printhead cable for continuity / connection. If the inspection passes, replace the printhead.

< 1 2 3 4 5 6 7 > Last ›

0