• Code: 935
• Description: Printhead error Mirror motor unable to reach operating speed.
• Remedy: Perform voltage check on printhead connector of the RIP card. If the voltages are incorrect, replace the card. Inspect the printhead cable for continuity / connection. If the inspection passes, replace the printhead.

• Code: 936
• Description: Transport motor Transport motor initial lock failure.
• Remedy: Inspect motor, cabling and main drive assembly. Replace defective parts.

• Code: 937
• Description: Transport motor Transport motor lost lock.
• Remedy: Inspect motor, cabling and main drive assembly. Replace defective parts.

• Code: 939
• Description: RIP - engine communications RIP processor cannot communicate with engine processor on RIP card.
• Remedy: Replace RIP card assembly.

• Code: 940
• Description: LVPS (Low Voltage Power Supply) There is a failure with the zero crossing signal on the line controlling the fuser lamp.
• Remedy: Ensure the proper LVPS is installed.

• Code: 941
• Description: Image pipeline An error was detected with the image pipeline ASIC on the RIP card.
• Remedy: Observe debug data of engine microcode. Replace RIP card assembly, if necessary.

• Code: 942
• Description: Scanner failure Communication failure. RIP card cannot establish communications with the scanner card.
• Remedy: Inspect the RIP–SCU cable for proper connection and conductivity. If the inspection passes, replace the SCU card.

• Code: 943
• Description: Scanner failure Carriage mechanical failure.
• Remedy: Check the mechanical movement of the CCD carriage. Replace the defective component.