Các lỗi thường gặp

Code :
  • Code: 956.xx
  • Description: System card processor failure The processor has failed on the system card assembly.
  • Remedy: Replace the system card assembly.
  • Code: 957.xx
  • Description: System card ASIC failure The ASIC has failed on the system card assembly.
  • Remedy: Replace the system card assembly.
  • Code: 958.xx
  • Description: NAND failure Printer has performed more than 100 "shift and reflash" operations as a result of ECC bit corrections
  • Remedy: Replace the system card assembly.
  • Code: 959.xx
  • Description: Print cartridge authentication failure The system card can not properly authenticate the print cartridge or the authentication process has failed.
  • Remedy: Replace the system card assembly.
  • Code: 960.xx ... 963.xx
  • Description: 960.xx Memory failure RAM Memory Error: RAM soldered on the card is bad 961.xx Memory failure RAM Memory Error: Slot 1 RAM is bad 962.xx Memory failure RAM Memory Error: Slot 2 RAM is bad 963.xx Memory failure RAM Memory Error: Slot 3 RAM is bad
  • Remedy: Replace the appropriate memory module.
  • Code: 964.xx
  • Description: Emulation failure The download Emulation Cyclic Redundancy Check (CRC) detected a failure.
  • Remedy: 1. Disable the Download Emulation. Program the download emulation into the firmware card again. 2. Replace the system card assembly if problem remains.
  • Code: 975.xx ... 979.xx
  • Description: 975.xx Network Error The system detected an unrecognizable network port 976.xx Network Error The system detected an unrecoverable software error in network port 978.xx Network Error The system detected a bad checksum while programming network port 979.xx Network Error The flash parts failed while programming a network port
  • Remedy:
  • Code: 982.04
  • Description: Output option communication failure. An output option was not fully seated onto the printer or has been removed while the main power is turned on.
  • Remedy: 1. Turn the main power off. 2. Remove and reinstall the output option. 3. Turn the main power back on. 4. Check all output option interface connections if problem remains.
‹ First  < 16 17 18 19 20 > 
popup

Số lượng:

Tổng tiền:

Danh mục