• Code: 922.82
• Description: Fuser warm-up failure Fuser type = 2 Fuser page count has exceeded life. The fuser hot roll does not reach operating temperature after increasing interpage gap.
• Remedy: Replace the fuser unit assembly

• Code: 923.00
• Description: Fuser over temperature failure. Fuser type = 1 The fuser hot roll has exceeded the proper operating temperature
• Remedy: 1. Turn the machine off/on and ensure the fuser unit assembly is properly installed. 2. Ensure the proper voltage fuser is installed in the machine. 3. Replace the fuser unit assembly

• Code: 923.01
• Description: Fuser over temperature failure. Fuser type = 1 The fuser hot roll has exceeded the proper operating temperature.
• Remedy: 1. Turn the machine off/on and ensure the fuser unit assembly is properly installed. 2. Ensure the proper voltage fuser is installed in the machine. 3. Replace the fuser unit assembly

• Code: 923.25
• Description: Fuser over temperature failure. Fuser type = 2 The fuser hot roll has exceeded the proper operating temperature.
• Remedy: 1. Turn the machine off/on and ensure the fuser unit assembly is properly installed. 2. Ensure the proper voltage fuser is installed in the machine. 3. Replace the fuser unit assembly

• Code: 923.26
• Description: Fuser over temperature failure. Fuser type = 2 The fuser hot roll has exceeded the proper operating temperature.
• Remedy: 1. Turn the machine off/on and ensure the fuser unit assembly is properly installed. 2. Ensure the proper voltage fuser is installed in the machine. 3. Replace the fuser unit assembly

• Code: 923.50
• Description: Fuser over temperature failure. Fuser type = 1 The fuser hot roll has exceeded the proper operating temperature.
• Remedy: Replace the fuser unit assembly

• Code: 923.51
• Description: Fuser over temperature failure. Fuser type = 1 The fuser hot roll has exceeded the proper operating temperature.
• Remedy: Replace the fuser unit assembly

• Code: 923.75
• Description: Fuser over temperature failure. Fuser type = 2 The fuser hot roll has exceeded the proper operating temperature.
• Remedy: Replace the fuser unit assembly