Mã lỗi Mimaki JV3-130S
Code:
Tất cả lỗi (24)
01
02
03
04
06
07
08
09
10
11
12
20
21
23
24
30
34
40
41
42
43
46
50
51
Code:
01
Display: ERROR01 MAIN ROM
Description: • The control ROM is in abnormal conditions.
Remedy: 1) Replace the main PCB with a new one.
Code:
02
Display: ERROR02 MAIN RAM
Description: • The control RAM is in abnormal conditions.
Remedy: 1) Replace the main PCB with a new one.
Code:
03
Display: ERROR03 POWER +5V POWER +35V
Description: • The +5V (+35V) voltage is in abnormal conditions.
Remedy: 1) Replace the power supply or the main PCB with a new one.
Code:
04
Display: ERROR04 FLASH ROM
Description: • The Flash memory is in abnormal conditions.
Remedy: 1) Replace the main PCB with a new one.
Code:
06
Display: ERROR06 D-RAM
Description: • An error has occurred in the D-RAM.
Remedy: 1) Replace the main PCB with a new one.
Code:
07
Display: ERROR07 TEMP n
Description: • Abnormal temperature is detected.
Remedy: 1) Has ink in the camper run out? 2) Check the FPC cable connection. 3) Replace the Slider PCB with a new one. 4) Replace the head with a new one. 5) Replace the main PCB with a new one.
Code:
08
Display: ERROR08 ENCODER
Description: • The Linear encoder is in abnormal conditions.
Remedy: 1) Replace the Linear encoder with a new one. 2) Replace the main PCB with a new one.
Code:
09
Display: ERROR09 HDC
Description: • Configuration of PDC/IOC has not been successfully carried out. •Configuration of HDC has not been successfully carried out.
Remedy: 1) Replace the main PCB with a new one.