Mã lỗi Mimaki JV4-180
Code:
01
Display: ERROR01 MAIN ROM
Description: • The control ROM is in abnormal conditions.
Remedy: 1) Replace the main PCB with a new one.
Code:
02
Display: ERROR02 MAIN RAM
Description: • The control RAM is in abnormal conditions.
Remedy: 1) Replace the main PCB with a new one.
Code:
03
Display: ERROR03 POWER +35V
Description: •The +35V voltage is in abnormal conditions.
Remedy: 1) Replace the the main PCB with a new one.
Code:
04
Display: ERROR04 FLASH ROM
Description: • The Flash memory is in abnormal conditions.
Remedy: 1) Replace the main PCB with a new one.
Code:
06
Display: ERROR06 D-RAM
Description: • An error has occurred in the D-RAM.
Remedy: 1) Replace the main PCB with a new one.
Code:
07
Display: ERROR07 TEMP n
Description: • Abnormal temperature is detected.
Remedy: 1) Has ink in the camper run out? 2) Replace the HDC PCB with a new one. 3) Replace the head with a new one.
Code:
08
Display: ERROR08 Linear Encoder n
Description: • The Linear encoder is in abnormal conditions.
Remedy: 1) Replace the Linear encoder with a new one. 2) Replace the main PCB with a new one.
Code:
09
Display: ERROR09 HDC
Description: • Configuration of PDC/IOC has not been successfully carried out. • Configuration of HDC has not been successfully carried out.
Remedy: 1) Replace the main PCB with a new one. 2) Replace the HDC PCB with a new one.