Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Mimaki JV4-180 — Trang 2/4

Code: 10

Display: ERROR10 COMMAND
Description: • Command code other than MRL has been received.
Remedy: 1) Check the data received through HEX dump. 2) If error occurs at 1394 a. Check Time out of the transfer tool (RIP). b. Replace the I/F connection board with [E102154A] or later. c. Replace the 1394 board with a new one. d. Replace the main PCB with a new one.

Code: 11

Display: ERROR11 PARAMETER
Description: • Parameter that has not defined in MRL has been received.
Remedy: 1) Check the data received through HEX dump. 2) If error occurs at 1394 a. Check Time out of the transfer tool (RIP). b. Replace the I/F connection board with [E102154A] or later. c. Replace the 1394 board with a new one. d. Replace the main PCB with a new one.

Code: 12

Display: ERROR12 Ment Command
Description: • A command error for manufacture of has occurred .
Remedy: 1) It is not used in the field.

Code: 20

Display: ERROR20 I/F BOARD
Description: • A error occurred in communication between the main PCB and the interface board.
Remedy: 1) Replace the I/F PCB with a new one. 2) Replace the main PCB with a new one. 3) Replace the I/F connection board with a new one.

Code: 21

Display: ERROR21 I/F NONE
Description: • The I/F board could not be recognized.
Remedy: 1) Is the I/F board mounted correctly ?

Code: 23

Display: ERROR23 HOST I/F
Description: • A time limit exceeded error occurred in communication between the host computer and the interface board.
Remedy: 1) Is the cable loose? 2) Has an error occurred on the host computer? 3) Is the application being used running normally?

Code: 24

Display: ERROR24 I/F INITIAL
Description: • The I/F board is in abnormal conditions.
Remedy: 1) Replace the I/F PCBwith a new one. 2) Replace the main PCB with a new one. 3) Replace the main PCB with a new one.

Code: 30

Display: ERROR30 OPERATION
Description: • Improper operation has been performed.
Remedy: 1) Indicate the improper operation. 2) Replace a key board. 3) Replace a main PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie