Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Mutoh ValueJet 1324 — Trang 5/7

Code: E079

Display: E079 Err Commu
Description: An anomaly is detected in serial communication between JUNCTION board and controller board during printer operation.

Code: E080

Display: E080 Err Junction
Description: An anomaly is detected in serial communication between JUNCTION board and controller board during printer operation.

Code: E081

Display: E081 Err CR Origin
Description: CR_HP cannot be detected.

Code: E082

Display: E082 Err Wiper Sns.
Description: An anomaly is detected in Wiper sensor.

Code: E085

Display: E085 error Head overheat
Description: Abnormal condition in the head driver.

Code: E087

Display: E 087 error Head transistor Th.
Description: Abnormal condition in head transistor.

Code: E090

Display: E090 Err Heater Volt.
Description: Displayed when voltage exceeds the threshold level of 200V start up even though the printer was started with the voltage of 100V on HEATER CONT board Assy .

Code: E092

Display: E092 Err CR Over Load
Description: An overload condition is detected in CR motor (Y-axis) during printer operation.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie