Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Mutoh ValueJet 1608HS — Trang 5/7

Code: E080

Display: E080 Error Junction
Description: An anomaly is detected in serial communication between HEATER JUNCTION board assembly and HEATER CONTROL board assembly during printer operation.

Code: E081

Display: E081 Error CR Origin
Description: CR_HP cannot be detected.

Code: E082

Display: E082 Err Wiper Sns.
Description: An anomaly is detected in Wiper sensor.

Code: E085

Display: E085 Error Head Heat
Description: An anomaly is detected in Head driver.

Code: E087

Display: E087 Error H transistor Th.
Description: An anomaly is detected in Head transistor.

Code: E090

Display: E090 Error Heater Volt.
Description: Displayed when voltage exceeds the threshold level of 200V start up even though the printer was started with the voltage of 100V on HEATER CONTROL board assembly.

Code: E097

Display: E097 Error NVRAM.
Description: An anomaly is detected in NVRAM.

Code: E124

Display: E124 Error PG Origin
Description: An anomaly is detected in PG origin sensor or PG motor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie